How to Identify Cold Solder Joints with a Multimeter
A bad solder joint can look fine and still fail a key. If I want to find it fast, I first inspect the joint, then check continuity, then check resistance, and only...
[ Read ]
// JOURNAL.INDEX
Mechanical Keyboards 101
How PBT Keycaps Improve Typing Feel
If your keyboard feels slick, loud, or worn, PBT keycaps can change that fast. I’d sum it up like this: PBT usually gives me more grip, less shine over time, and a...
[ Read ]
Dvorak and Colemak: Learning Curve Explained
If you want the easier switch, I’d pick Colemak. If you want a bigger break from QWERTY, I’d look at Dvorak. Here’s the short version: both layouts can cut finger travel, but...
[ Read ]
How to Debug Keyboard Firmware Issues
A practical keyboard firmware guide covering how to debug keyboard firmware issues with troubleshooting tips, setup advice, and next steps for custom builds.
[ Read ]
5 Discord Servers for Keyboard Builders
Building a custom mechanical keyboard can be overwhelming, but joining the right online community can simplify the process.
[ Read ]
Spring Swapping Guide for Beginners
Spring swapping is the process of replacing the springs inside mechanical keyboard switches to change how keys feel and respond.
[ Read ]