[KFA MARKETPLACE] Cherry Ultraglide Howlite Switches R1 (Dry-Wet Lubed, SS, Broken-in; x70) #3

A Frankenswitch made for those after the classic Cherry sound profile with long pole preference. Ingredients: Cherry Hyperglide nylon housing and Geon Cloud stem. Cherry MX Blacks were broken in for approximately 500k actuations stock to polish bottom housing rails. Then spring and stem swaped to counteract stem wobble of extensive break-in process. Spring swapped to 62.5g 22mm long KOS Ni-MO springs. Swapped Cloud stem were manufactured by Tecsee for Geon. Clocks in at 13.55 mm length compared to Zaku's 13.46m and 13.48mm for NK Launch Cream. Considerably cheaper to make and carries a much fuller and slightly deeper pitch than other variants. Applied 2 layers of RO-59tmKT dry lube (premixed by Ringerkeys) to bottom housing rails. Applied 3 coats to all four sides of stem. Applied additional layer of light GHv4 grease-oil wet lube (GPL 206g2 and 106 oil in a 10:3 ratio). Applied GPL 105 oil to springs. Mechanically actuated an additional 50k on each side using off-center module break-in machine from Dingkeys. Enjoy and share feedback in marketplace discussion.